Installation Instructions
SINGLE-LEAF DRVWALL DOOR
Tecnical note and assembly instructions.
1
Loosen the screws of the upper beam, resting it and alter, inserting it (with the guide turned downward) in the support inside the counterframe, making sure that it touches the z uprights of the same.
2
Set the lateral upright so that it mates with the upper beam and then, lock with relative screws.
3
Insert the spacers in the relative preformed slots.
4
For new constructions, create suppor! points at finished floor level (see level at 100 cm), check the alignment between the box and the upright, the plumb line and the surface.
Warning: do not mount the box higher than the finished floor. Already existing floor, piace the counterframe on the floor. Check the alignment between the box and the upright, the lead and the surface. Fix the box to the floor.
5
Fix the plasterboard profiles to the perimeter of the subframe and fix the plasterboard to the box reinforcements using specific screws.
DOUBLE-LEAF DRVWALL DOOR
Tecnical note and assembly instructions.
1
Assembly of single headboards
Only to be performed when the joining bracket is used.
Using a hacksaw, remove the pre-cut plate from the front part of the two beams and insert these as specified for
the Eurocassonetto with one door. Once it's done, link them with the junction bracket, sliding them until they are perfectly in line and then tighten the screws.
2
Loosen the screws of the upper beam, resting it and after, inserting it (with the guide turned downward) in the support inside the counterframe, making sure that it touches the zuprights of the same.
3
Insert the spacersin the relative performed slots.
4
For new constructions, create support points at finished floor level (see level at 100 cm), check the alignment between the box and the upright, the plumb line and the surface.
Warning: do not mount the box higher than the finished floor. Already existing floor, place the counterframe on the floor. Check the alignment bewl’\:ee'nl'u the box and the upright, the lead and the surface. Fix the box to the floor.
5
Fix the plasterboard profiles to the perimeter of the subframe and fix the plasterboard to the box reinforcements using specific screws.
SINGLE-LEAF PLASTER DOOR
Tecnical note and assembly instructions.
1
Loosen the screws of the upper beam, resting it and after, inserting it (with the guide turned downward) in the support inside the counterframe, making sure that it touches the z uprights of the same.
2
Set the lateral upright so that it mates with the upper beam and then, lock with relative screws.
3
Insert the spacers in the relative performed slots.
4
For new constructions, create support points at finished floor level (see level at 100 cm), check the
alignment between the box and the upright, the plumb line and the surface.
Warning: do not mount the
box higher than the finished floor. Already existing floor, place the counterframe on the floor. Check the
alignment between the box and the upright, the lead and the surface. Fix the box to the floor.
DOUBLE-LEAF PLASTER DOOR
Tecnical note and assembly instructions.
1
Assembly of single headboards
Only to be performed when the joining bracket is used.
Using a hacksaw, remove the pre-cut plate from the front part of the two beams and insert these as specified for
the Eurocassonetto with one door. Once it's done, link them with the junction bracket, sliding them until they are perfectly in line and then tighten the screws.
2
Loosen the screws of the upper beam, resting it and after, inserting it (with the guide turned downward) in the support inside the counterframe, making sure that it touches the zuprights of the same.
3
Insert the spacers in the relative performed slots.
4
For new constructions, create support points at finished floor level (see level at 100 cm), check the
alignment between the box and the upright, the plumb line and the surface.
Warning: do not mount the box
higher than the finished floor. Already existing floor, place the counterframe on the floor. Check the
alignment between the box and the upright, the lead and the surface. Fix the box to the floor.
We Carefully Build The Happiness of Living
partners in excellence
Robust, Rigid, Resistant
We would like to be for you that company able to offer not only counterframes for retractable door but a reality that is able to assist you in every need and to always provide you the correct solution about sliding systems for internal and external fixtures, so as to offer your high quality and reliable products.
EUROCASSONETTO – Frames for concealed doors and sliding systems.